|
|
|
|
JL Audio SB-T-TUNCNSL2/10W3v3 (JL Audio)
|Factory Stereo (OEM) Integration|Vehicle Specific Subwoofer Solutions|JL Audio Stealthboxes|Toyota
Subwoofer Features: 10in Single 4 Ohm W3v3 Series Subwoofer Power Handling: Peak: 1000 watts RMS: 500 watts Impedance: Single 4 Ohm Mineral-filled polypropylene cone woofer Nitrile-butadiene rubber surround DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output Vented reinforcement collar improves rigidity and stability of the cone, spider, and voice coil Spider and lead wire assembly Elevated frame cooling enhances power and sound quality Floating Cone Attach Method allow the cone and surround to be aligned independently Sensitivity: 86 dB 1-year Sonic Electronix warranty (subwoofer only) Enclosure Features: Wired for 4 ohms Compatible with: Toyota 2003-2006 Tundra Access Cab Installs in the front center console Installation requires modification of rear heating ducts and affects airflow Will not fit Double Cab models with OEM DVD Player or with manual transmissionPlease Note: Some JL Audio Stealthboxes are not designed to perfectly match OEM colors. Some colors will contrast with OEM colors in order to provide a stylish setup. If you are looking for the closest color match, please select the JL Audio Stealthbox color that is as close to your OEM color as possible and indicate your vehicle's interior color when ordering.
Get the latest information and reviews on JL Audio SB-T-TUNCNSL2/10W3v3 online. We carry one of the largest products including JL Audio SB-T-TUNCNSL2/10W3v3. Let us help you pick the right product for you by offering all the information you need to make the right choice.
|
| |
| Other JL Audio Products: |
JL Audio M770-CCX-CG-WH 7.7in 2-way Marine Speakers with White inClassic Grillesin Power Handling: Peak: 175 watts RMS: 100 watts Injection-mol...JL Audio 8W3V3-8 8in Single 8 ohms W3v3 Series Subwoofer Power Handling: Peak: 500 watts RMS: 250 watts Impedance: Single 8 ohms Minera...JL Audio VR650-CXi 6-1/2in VR Series 2-Way Car Speakers Power Handling: Peak: 100 watts RMS: 60 watts Injection-molded mica filled polypro...JL Audio SB-T-4RNR2/10w3v3/GA (STONE) Subwoofer Features: 10in Single 4 Ohm W3v3 Series Subwoofer Power Handling: Peak: 1000 watts RMS: 500 watts Impedance: ...JL Audio SB-N-ARMAD/10W6v2/DG2 (CHARCOAL) Subwoofer Features: 10in Dual 4 Ohms W6v2 Series Subwoofer Power Handling: Peak: 1200 watts RMS: 600 watts Impedance: D...JL Audio SB-GM-BLZR4DR/10W1v2/BK (BLACK) Subwoofer Features: 10in Single 4 Ohms W1v2 Series Subwoofer Power Handling: Peak: 250 watts RMS: 125 watts Impedance: ...JL Audio SB-J-GRCHER3/10w1v2/DG (AGATE) Subwoofer Features: 10in Single 4 Ohms W1v2 Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Injection-m...JL Audio SB-D-TRKEXT/10W1v2/MT (CAMEL/TAN) Subwoofer Features: 2 10in Single 4 Ohms W1v2 Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Injection...JL Audio SGR-10W6v2 Mesh Grill Insert for 10W6v2 10in W6 Subwoofer Fits 10W6v2 only No warranty...JL Audio M770-CCS-CG-WH 7.7in 2-way Marine Component Speakers System with White inClassic Grillesin Power Handling: Peak: 175 watts RMS: 100 watts ...
|
| JL Audio SB-T-TUNCNSL2/10W3v3 - Questions & Answers: |
Below are the frequently asked questions by potential buyers and users about JL Audio SB-T-TUNCNSL2/10W3v3 or related issues. All of these contributions will help you to make better disissions on what to buy:
|
| JL Audio Electronics Related Videos: |
|
 |
iPad in Car, Pt. 1, First Ever, SoundMan Car Audio
6.35 min. | 4.7921953 user
rating
full install instructions here: www.soundmancaraudio.com FACEBOOK.com www.twitter.com April 3rd, The day of the iPad launch, Doug Bernards installs an iPad in his car alongside an Audison Bit One processor. Planned install will include a McIntosh 6 channel amplifier MCC406M, and a special iPod dock which allows the digital signal to be pulled from the iPad and distributed to the BitOne via optical output. Toyota Tacoma. Stay tuned for the rest of the build.
|
|
 |
JL Audio 12W7 Excursion
0.25 min. | 4.6923075 user
rating
JL Audio 12W7 Free Air Excursion
|
|
 |
JL Audio 13 W7s Flexing
1.88 min. | 4.7845807 user
rating
My 2 JL W7 13.5s playing some Jeezy slowed down. Running them is an Orion 2500 D at 2 ohms...
|
|
 |
Four JL Audio 8w7 Beatin
0.50 min. | 3.4705882 user
rating
4 JL AUDIO 8w7.2 flexing hard
|
|
 |
iPad in Car, Pt. 2, First Ever, SoundMan Car Audio
5.98 min. | 4.911447 user
rating
www.SoundManCarAudio.com http www.twitter.com Part two of the iPad Tacoma install. in this video Doug Bernards hows you the completed dash panel for the removable iPad. The install is planned for the 3g iPad which is on pre-order, the amp to be used is the McIntosh mcc406m. Doug goes over the difficulties of integrating into the iPad's dock connector. Stay tunned for part 3.
|
|
 |
12 JL W7
0.90 min. | 4.85 user
rating
A Look At My Custom JL Audio System.
|
|
 |
iPad in a Maxima, SoundMan Car Audio
1.62 min. | 4.627907 user
rating
www.SoundManCarAudio.com http www.twitter Watch Jordan Mann from SoundMan Car Audio install an iPad in a 2004 Nissan Maxima. In this install the iPad is plugged in to an Alpine 205 double din.
|
|
 |
Car Audio 101 - The Big 3 Upgrade Tutorial
6.20 min. | 4.8913045 user
rating
DIY with Mike Stiers www.maxxsonics.com So you've decided to upgrade your car stereo system? A great deal of research and planning should go into this purchase since there is a lot to consider. Do you desire a nice upgrade of your factory speakers, are you looking for a Sound Quality overall of speakers, subwoofers and amplifiers, or are you designing a vision-blurring SPL machine? It is important to make a list of exactly what you are looking to replace or add to your audio system so that you can prepare your electrical system for the investment to come. Many people do not realize that their vehicles factory electrical system was not designed for aftermarket audio equipment. In fact, most factory electrical systems can only handle an audio system of 600 to 1200 watts. The lower end of the scale being the smaller vehicles and most foreign rides, and the upper end being large trucks and sport utility vehicles. As you increase demand, you need to look at upgrading your battery, alternator and most importantly your Big 3. THE BIG 3 The Big 3 consists of upgrading three wires under the hood of your vehicle. You can completely replace the three wires detailed below, or simply add additional wires to existing factory wires, the choice is yours. The existing factory wires are generally 8 gauge or smaller and are not designed for the high current demands of an aftermarket audio system. It is recommended that you use a nice insulated 0 gauge wire so that you only have to do this ...
|
|
 |
Big Subwoofers
1.10 min. | 4.3469386 user
rating
Song: Money in the Bank, by Lil Scrappy------------- My JL audio 12 in W1V2 Subwoofers. Powered by a 500 watt Alpine Audio Amplifyier. Dont mind the rattle, its because of the Jeeps window Latch and license plate from the bass under pressure.
|
|
 |
iPad in Car, Pt. 3, First Ever, SoundMan Car Audio
9.82 min. | 4.9495797 user
rating
www.SoundManCarAudio.com, http www.Twitter.com Part 3 of Doug Bernards' iPad Tacoma build. In this video Doug's amp gets sold and he decides to use an Audison LRX 5.1K which is a great match for the set-up. A Pair of Hybrid Audio Legatia 6's are installed in the door panels along with plenty of Accumat (a very nice Dynamat alternative). A Quick look at the Bit One is seen, as Doug sets up the new amp. A simple curved amp rack is built and wrapped in vinyl. The iPad Tacoma was featured on KTLA 5, Kurt the CyberGuy, and one of CNN's tech shows. stay tuned for part 4, final episode.
|
|
|
